Maker: Herman Knives
Model: Dragonfly
Configuration: Right-handed
Overall Length: 8.86 in / 225 mm
Blade Length: 3.82 in / 97 mm
Closed Length: 5.04 in / 128 mm
Blade Thickness: 0.150 in / 3.8 mm
Blade Width: 1.18 in / 30 mm
Weight: 5.71 oz / 162 g
Blade Steel: RWL34 powder metallurgy stainless steel by Damasteel
Blade Hardness: 61 HRC
Heat Treatment: Includes deep cryogenic treatment with liquid nitrogen
Blade Grind: Flat grind
Blade Finish: Stonewash
Detent: Medium
Detent Ball: Ceramic
Handle Material: Grade 5 titanium
Handle Appearance: Teal and bronze tones with diagonal machined grooves
Inlay Material: Grade 5 titanium
Inlay Pattern: Leaves
Pocket Clip: Grade 5 titanium
Backspacer: Floating Grade 5 titanium
Lock Type: Liner lock
Lock Component: Grade 5 titanium
Lock Insert: Tungsten carbide
Stop Pin: Tungsten carbide
Pivot Material: Polished 440C stainless steel
Pivot Hardness: Vacuum-hardened to 56–58 HRC
Pivot System: Herman Knives in-house TORX T20 pivot with increased thread diameter and reduced thread pitch
Screws: Polished, vacuum-hardened 440C stainless steel
Bearing System: Herman Knives custom ceramic caged ba
The Herman Knives Dragonfly RWL34 Leaves is a right-handed folding knife with a flat-ground, stonewashed blade and a patterned titanium handle. Its 3.82-inch (97 mm) blade uses RWL34 powder metallurgy stainless steel from Damasteel, hardened to 61 HRC with deep cryogenic treatment included in the heat-treatment process.
The Grade 5 titanium handle combines teal and bronze tones with diagonal machined grooves. A contrasting titanium inlay carries the Leaves pattern, adding a botanical detail to the handle’s geometric machining. A titanium pocket clip and floating backspacer complete the assembly.
Herman’s custom bearing system uses 16 ceramic balls in each cage, running against M390 steel washers hardened to 60 HRC and hand-lapped to approximately 4000 grit. The construction also includes a ceramic detent ball, a titanium liner lock with a tungsten carbide insert, a tungsten carbide stop pin, and Herman’s in-house TORX T20 pivot.
The knife comes with its original Herman Knives box, a certificate of authenticity, a microfiber cloth, Pruciak Protector Glide for Herman oil, and a dedicated titanium screwdriver.
Maker: Herman Knives
Model: Dragonfly
Configuration: Right-handed
Overall Length: 8.86 in / 225 mm
Blade Length: 3.82 in / 97 mm
Closed Length: 5.04 in / 128 mm
Blade Thickness: 0.150 in / 3.8 mm
Blade Width: 1.18 in / 30 mm
Weight: 5.71 oz / 162 g
Blade Steel: RWL34 powder metallurgy stainless steel by Damasteel
Blade Hardness: 61 HRC
Heat Treatment: Includes deep cryogenic treatment with liquid nitrogen
Blade Grind: Flat grind
Blade Finish: Stonewash
Detent: Medium
Detent Ball: Ceramic
Handle Material: Grade 5 titanium
Handle Appearance: Teal and bronze tones with diagonal machined grooves
Inlay Material: Grade 5 titanium
Inlay Pattern: Leaves
Pocket Clip: Grade 5 titanium
Backspacer: Floating Grade 5 titanium
Lock Type: Liner lock
Lock Component: Grade 5 titanium
Lock Insert: Tungsten carbide
Stop Pin: Tungsten carbide
Pivot Material: Polished 440C stainless steel
Pivot Hardness: Vacuum-hardened to 56–58 HRC
Pivot System: Herman Knives in-house TORX T20 pivot with increased thread diameter and reduced thread pitch
Screws: Polished, vacuum-hardened 440C stainless steel
Bearing System: Herman Knives custom ceramic caged ba
The Herman Knives Dragonfly RWL34 Leaves is a right-handed folding knife with a flat-ground, stonewashed blade and a patterned titanium handle. Its 3.82-inch (97 mm) blade uses RWL34 powder metallurgy stainless steel from Damasteel, hardened to 61 HRC with deep cryogenic treatment included in the heat-treatment process.
The Grade 5 titanium handle combines teal and bronze tones with diagonal machined grooves. A contrasting titanium inlay carries the Leaves pattern, adding a botanical detail to the handle’s geometric machining. A titanium pocket clip and floating backspacer complete the assembly.
Herman’s custom bearing system uses 16 ceramic balls in each cage, running against M390 steel washers hardened to 60 HRC and hand-lapped to approximately 4000 grit. The construction also includes a ceramic detent ball, a titanium liner lock with a tungsten carbide insert, a tungsten carbide stop pin, and Herman’s in-house TORX T20 pivot.
The knife comes with its original Herman Knives box, a certificate of authenticity, a microfiber cloth, Pruciak Protector Glide for Herman oil, and a dedicated titanium screwdriver.
When you click on BUY button, you are sending an order for the chosen item.
In this order is mentioned: Country and location for delivery
Preferable payment method
Your contact information
Our customer service will give you feedback with confirmation of availability on stock, possibility the item to be delivered to your country and the price of shipment.
We will issue invoice for payment or we will give you link for card bank transfer on our site.
For additional information or any concerns, please contact our manager.
